Track Dog Racing

CXRacing

CXRacing 4/2/1 header pipe (http://www.cxracing.com)

[2/28/2008] Reviewed by: Ron LeVine - levine.ron@gmail.com

Applicable to: '90 - '97

Typical 4/2/1 header for a 1.6L engine with a 5 speed transmission.

Installation was easier than taking the stock unit out. However, the angle on the rearmost flange is wrong so the joint by the Cat leaks and the bung for the O2 Sensor is in a place where there is about 1/2 inch between the top of the bung and the transmission so there is no way an O2 sensor can be installed. I had to have the header modified by having a new bung placed in the proper position so I could actually use one and I had to have the rear flange cut, re-angled and rewelded back in to make this work.

Seller is unreasonable in the least. I would not in any way shape or form recommend buying anything from this fellow. If you do and you get screwed as I did, don't come looking to me for sympathy as I will just laugh at you.

Under 30 minutes to remove completely


Back to Product Reviews

8 June, 2008



[Home] - [FAQ] - [Search] - [Sponsors] - [Forums]
[Garage] - [Clubs] - [Contact Us] - [Disclosures] - [More...]
Copyright ©1994-2024, Eunos Communications LLC
All rights reserved.