New!
The M2 99-02 Miata muffler section from Thermal. Still uses the same 2.25"
tubing with mandrel bends from the original M1 and M2 catback systems and the
very classy polished stainless steel 3" slant tip.
For more information: Mazda South
(Added 12/19/01)
Another
exclusive by RSpeed - the RS Edition Circuit 8. RSpeed has taken Rota's best
selling Circuit 8 and had the outer lip machined and polished. Looks incredible
standing still and even better at high speed. If you buy a set of 4, they'll
even through in hub centric rings and lug nuts for free. Rspeed is currently
offering a special introductory price.
For more information: RSpeed
(Added 12/14/01)
Racing
Beat introduces the latest performance muffler to their exhaust system line-up!
The two 3.15-inch exhaust tips featured on this muffler are manufactured using highly polished 304-stainless steel and are slightly oval in shape to provide a perfect balance and proportion with the Miata's rear bumper. Each tip features a subtle, bead-blasted Racing Beat logo to add the finishing touch!
Designed entirely by Racing Beat, this muffler features stainless steel and ceramic sound-deadening insulation to provide the optimum exhaust note for your Miata. The exhaust note will be slightly louder than stock, but retains the subtle and distinctive Miata exhaust tone. These mufflers have tested to be in compliance with the 95 db noise level limit that has been established in the state of California.
Each system comes complete with installation instructions and necessary mounting hardware, and can be easily installed in minutes using only basic hand tools. A simple template is provided to allow you to easily position the cutting guide for the additional tip opening. The soft urethane material on the stock bumper can be easily cut using a utility knife, and then finished with a light sanding application for a finished look.
Price: $375.00
For more information: Racing Beat(Added 12/6/01)
Need
a spacer to bring your aftermarket steering wheel just a little bit closer?
Already have a spacer but can't get it centered? We've got the fix in our new
adjustable steering wheel spacer. Features 9 deg. of movement to get the wheel
just right and the outer edge is the same textured finish as our hub adaptor
for a more complete look. Spacer thickness is 10mm. Includes screws, lock washers
and Allen wrench.
(Added 11/26/01)
Want
to hide that ugly Deck lid underside? Now you can with the new "Deck lid
Liner" made from Automotive grade carpeting that matches the trunk liner.
Attaches directly under the trunk lid with no tools or drilling required. "Miata"
script is embroidered across the center in the most popular Miata colors - Red,
Silver, Blue and Green
For more information: www.robertsproducts.com
(Added 11/19/01)
Good-Win
Racing introduces the new RoadsterSport muffler for '99 and newer Miatas. The
only all polished 304 stainless steel construction Miata muffler for under $300
and the only all stainless adjustable backpressure muffler for the Miata period.
With 65mm tubing (2.56 inch) and a straight through design, this is also the
one muffler that the normally aspirated Miata will not outgrow if a supercharger
or turbo is added later. Introduction price just $249.
For more information: www.good-win-racing.com
(Added 10/19/01)
Take
the guess work and hassle of building your own with this Big Red Starter Button
from Metro Motorsports. A simple "plug 'n play" illuminated system
that fits perfectly into the cigarette lighter hole and connects exactly as
a factory item. So simple in fact, there's no instructions needed. Available
for both 90-97 and 99-01 models. Minor hole adjustment for NB models.
For more information: www.metromotorsports.com
(Added 10/3/01)
Finally
a 4 piston, light weight big brake kit that fits in the 1999 and newer 15x6"
wheels. No spacers are required and it won't rattle. All rotors are silver CAD
plated for maximum resistance to corrosion and show quality looks. A complete
set of stainless steel brake lines and high performance brake pads is included.
For more information: Brain Storm Products
(Added 9/25/01)
Stop
contaminating your own motor with this Oil Catch Tank from Okuyama Japan. Traps
oil and other foreign debris allowing for a cleaner running engine. Quality
construction incorporates a clear viewing meter and drain plug for easy maintenance.
Universal bracket gives you unlimited mounting positions for any year Miata.
Finished in a semi-polished aluminum, this catch tank will last for years, save
you money and possible repairs. Includes all hardware and clear reinforced tubing
for a thirty-minute installation.
For more information: www.metromotorsports.com
(Added 9/18/01)
New
vent windows are straight from the aviation industry. They have been certified
for use in aircraft so they have to be highest quality. Each set is manufactured
from high quality polycarbonate and acrylics, precision laser cut to the exact
dimensions of the Miata Quarter windows. The adjustable vent allows you to direct
fresh air into various areas inside your Miata. Smokers will like the ability
of the vents to remove the smoke from your interior. These are great performers
in top up and bad weather. Set comes with everything to install both windows
including simple to follow instructions. Installation takes about 1 hour and
fits all years.
For more info: Finish Line Performance
(Added 9/12/01)
Supercharged
or Turbocharged -- It doesn’t matter which. Now either way you can tell the
world what is under the hood with Team Miata’s OEM style Supercharged and Turbocharged
emblems.
These high quality chromed plastic emblems are made by the same company that makes similar emblems for the likes of Chevy, Ford and Chrysler. Backed with OEM quality all-weather adhesive, you can put these emblems anywhere on your Miata.
For more info: www.TeamMiata.com
(Added 9/12/01)
New
from Europe Durable stainless steel scuff plates that cover more area than
the average after market scuff guards. Easy to install and less expensive than
the factory M Edition scuff plates, these will add a wonderful touch as well
as protect your door jambs on your Miata’s interior. Comes with Miata or Roadster
script logo for 89-2001 Miatas.
For more information: RSpeed
(Added 9/12/01)
New
from Europe newly designed classic grilles for your Miata adds the special
touch of vintage flair that your Miata deserves. Made out of high polished stainless
steel, they have a mirror finish and can be installed in less than 10 minutes.
Come with instructions and your choice with our without cut outs for your tow
hooks for 89-2001 Miatas.
For more information: RSpeed
(Added 9/12/01)
The
new Trunk lift Kit for the 99+ Miata is fabricated
with aluminum brackets. The lift is a hydraulic and is designed to hold the
weight of your Miata trunk - even if it has a spoiler! Easy installation in
20 minutes.
Available from:
(Added 9/8/01)
The
new Trunk Lift Kit from Roadster Performance is designed
for minimal fuss during installation, and an OEM quality fitment. This kit is
manufactured for Roadster Performance exclusively and features a high quality
finish bracket and hardware to prevent any corrosion. It is available for a
limited introductory price of $34.95.
Current version available for 90-97 Miatas only. 99+ version expected to be available shortly.
For more information: Roadster Performance
(Added 9/5/01)
The
Bipes Auxiliary Ignition Timing Control Unit (ACU) allows a user selectable
amount of timing retard to be applied to avoid knock and detonation. It also
allows for air intake temperature compensation and offers several display mode
features. This unit has been designed for both supercharger and turbocharger
applications, and can also work for naturally aspirated and nitrous oxide equipped
vehicles! Package comes with ACU, detailed Owners Manual, and wiring harness.
For more information: Roadster Performance
(Added 8/21/01)
Now
in at RSpeed from Japan, new Garage Vary spoilers for 1999-2001 Miatas. These
spoilers can be painted any body color to match but are equally attractive in
their natural and durable Urethane finish. All Garage Vary Body parts have perfect
fit and finish and mounts with existing bolt locations.
For more info: RSpeed
(Added 8/13/01)
Just
what your top has been craving! Whether you have a vinyl top or a fabric top,
there is a 303 Convertible Top Care kit to meet your needs.
The NEW All-in-One Kit contains both the 303 Convertible Top Cleaner AND the 303 Aerospace Protectant or 303 High Tech Fabric Guard - Everything you need to keep your top looking like new!
The new 303 Top Cleaner utilizes a unique "colloidal" action to lift and suspend oil, grease and dirt. It does not contain soap, detergents, toxic organics, phosphates, nitrates or caustics. 303 Top Cleaner is extremely effective and extremely safe and leaves no residue like most cleaners.
For more info: www.TeamMiata.com
(Added 8/13/01)
These
washer jets really turn heads. Fitted with white LEDs these chrome jets look
great day or night. Installs in about 45 minutes. No drilling required on 1999
and newer cars. 1990-97 cars require minor drilling.
For more information: Brain Storm Products
(Added 8/2/01)
The
Accumate battery charger is completely automatic, safe and simple to use. The
advanced 3-stage charging program features both constant current and constant
voltage charging to completely and correctly charge today's batteries. The Accumate
will also properly maintain a battery at it's correct voltage during storage
and long periods of non-use without overcharging and gassing. The Accumate is
reverse polarity protected and spark proof, and features five separate LED lights
indicating a battery's charge status. For charging and maintaining batteries
up to 55Ah and for maintaining batteries over 55Ah. Comes with ring and clip
style cables with a quick disconnect. Perfect for long term storage or daily
use.
$59.95 Shipping & handling included
For more info: Westco Battery
(Updated 10/23/01)
This
O2 sensor uses the submersible Bosch patented PosiLock connection system, which
means no crimping wires or soldering! The PosiLock system makes the connections
more secure than crimping, and encloses them in a weatherproof case. Perfect
for 4 wire O2 upgrades for Forced induction use!
This sensor uses an extra shield over the O2 sensor element, which helps protect the sensor from contaminants (such as excessively rich fuel mixtures while tuning), as well as from the rapid transient EGT changes Miata forced induction systems routinely see when going in and out of boost.
For more information: Roadster Performance
(Added 7/27/01)
Now
you can have a chrome style bar that works together with the Mazda factory windstopper.
Does not interfere with the seat travel - they can fully recline. Fits
the 99+ and 2001 Miata and can be installed in 20 minutes.
For more info: IL Motorsport
(Added 7/19/01)
New
accents for your Miata - chrome side markers with hidden screws. These are complete
new side markers for front and rear bumpers in a set of four. They contain Hella
LED inserts and come complete with all wires and required hardware.
For more info:
(Added 7/19/01)
The
new slotted rotors from Roadster Performance are machined from high quality
rotors, using tapered slots to help evacuate water and promote better cooling.
After the machining process the rotors are then coated with a long lasting black
cad based coating for a unique long lasting finish. Beware of rotors that are
not taper slotted, the slot extends completely to the rotor edge, or rotors
that simply have several grooves machined across the entire face. The first
two may lead to rotor warpage or cracking issues while the third is simply to
reduce machining costs.
For more information: Roadster Performance
(Added 7/8/01)
Klozer
Racing Matz
High quality, heavy duty polished aluminum diamond plate floor mats fit perfectly in your Miata. Available for all model years. Easy to install, no slide and the last mats you'll ever buy! Made in the USA.
For more information: Finish Line Performance
(Added 6/29/01)
Great
deal on SCCA / Track letter and number kits. Kits are available in 3 different
options on them- solid color with border, single color fade from white to color
of choice, as well as a full color fade effect from one color to another. Standard
kits include 2 pairs (for both sides of car) of 3 4" class letters plus
3 8" numbers.
Available in many color choices, and additional letters or numbers available for a nominal fee.
For more information: Roadster Performance
(Added 6/26/01)
The
anodized aluminum gas lid from Finish Line Performance is a beautifully crafted
item, fitting perfectly and installs in a mere 10
minutes utilizing existing bolts. Weighs under 1lb.
and allows you to use your factory remote lid opener from
the cockpit with no modifications.
Fits 90-97 Miata's.
For more information: Finish Line Performance
(Added 6/22/01)
Protection
from road tar and style to boot! This brand new mudguard was introduced for
the 2001 model Miata but will fit all M2 99+ applications.
For more information: Mazda
South
(Added 6/17/01)
Get
the look of a vintage roadster with this high-flowing, elegant grill. Made of
stainless steel mesh this grill is strong and beautiful. Designed by our friend
Buck Redington. Available for all years. (Shown here on a 2001 Miata)"
For more information: www.miata.org
(Added 6/17/01)
New
Altezza Style Lights for the M1 Miata are finally here. These are direct drop
in and can be installed in less than 20 minutes flat. They look great in the
day and really come alive at night. They are DOT approved and are currently
available.
For more info: RSpeed
(Added 6/20/01)
Illuminate
your AutoExpressions teeth with the soft glow of electro-luminescent technology!
The kit is easily installed to the existing wiring harness, so the lights come
on with the running lights or headlights. No additional switch needed. It produces
an unmistakable yet subtle glow for any model year Miata equipped with any of
6 models of AutoExpressions teeth. Coolness, 24/7!
For more information: www.auto-expressions.com
(Added 6/17/01)
Add
some panache to the front end of your '99 or 2000 Miata. Installs in minutes
using double sided mounting tape. Made of high quality injection molded plastic
for a perfect fit. Comes unpainted and is sold by the pair.
For more information: www.miata.org
(Added 6/17/01)
Now
you can have the look of the older model Miatas with this polished stainless
steel door handle kit made especially for 99-01 models. Covers are contoured
to fit perfectly over your existing handles and install in minutes using heavy
duty self-sticking tape.
For more information:
www.metromotorsports.com
www.ilmotorsport.de
(Added 5/23/01)
Keep
your front end clean and uncluttered while protecting your expensive driving
lights! This new bracket from BrainStorm Products allows you to mount your driving
lights behind your grill. Compatible with most driving lights and grills.
For more information: www.miata.org
Need
a bit more polished aluminum to go with your vent rings, shift knob, brake
handle, and whatnot? Now you can get a billet aluminum hub cover from Finish
Line Performance to add one more bit of "shine" to your interior.
Designed to work with the Finish Line hub adapter, it is available with or without
the adapter.
Just remove aftermarket wheel, remove plastic cover, install billet cover, install wheel then smile.
For more information: www.miataparts.net
(Added 5/10/01)
Transform
your Miata into a aggressive beast in just 2 hours with this stripe kit made
exclusively for Metro Motorsports. Kit comes complete with pre-cut stripes,
squeegee, and detailed instructions for a professional installation. All you
need is a few household items, soapy water, and some helping hands.
Available now in Blue, Red, Yellow, or White. Custom colors also available.
For more information: www.metromotorsports.com
(Added 5/8/01)
They're
back! After a two year absence, we now have a NEW Miata.net license plate frame.
The new frames are available in either polished stainless steel or black powdercoat
and you have a choice of styles. Laser blasted with "WWW.MIATA.NET",
"Have you hugged a curve today?", or your email address or other custom
text next to the Miata.net Logo, these frames won't crack or fade in the sun!
For more information: Miata.net Shop
(Added 4/8/01)
One
of the most frequent car care questions we get is "What should I use to
protect my soft top?". Raggtopp™ Protectant from Wolfstein's
was developed for the true convertible top professional and enthusiast to protect
and maintain fabric and vinyl soft tops as well as platic windows from harmful
elements.
Raggtopp™ Protectant is truly a one-of-a-kind product designed for expensive convertible tops to repel water and breathe at the same time. Extend the life and restore the beauty of your top by deepening the color tones and increasing water repellency with each application.
For more information: Johnson Company, www.autotops.com/cleanandprotect.html
(Added 4/8/01)
If
you ever wanted to replace your factory steering wheel with a Momo, but avoided
the job due to the extensive modifications required, you can now have your cake
and eat it too! The Finish Line Hub makes Momo installation a snap! No modifications
are required - not even cutting into the wiring harness! This hub comes complete
with mating connectors for your horn wire and airbag as well as a resistor to
ensure your airbag warning light doesn't flash. Installation is simple and fully
reversible!
For more information: www.miataparts.net
(Added 4/8/01)
Good-Win
Racing introduces an anodized aluminum version of its popular MonsterFlow Intake.
The anodized version comes in either red or blue with an introductory price
of just $220 while supplies last. This intake significantly brightens up the
look of the under hood area while adding horsepower and improving throttle response.
As with the other versions of this kit, a patented MonsterFlow filter is included
featuring unique turbulence correctly blades to smooth and direct air flow.
This unique two-piece foam filter comes apart for ease of cleaning. High quality
silicon hose connects the filter to the new anodized cross tube. Comes complete
with installation instructions and all hardware. Fits 1999 through 2001.
For more information: www.good-win-racing.com
(Added 4/5/01)
TODA
Racing offers lightweight flywheels for both 1.6 and l.8 liter Miatas. TODA
flywheels are produced from 100% Chrome-moly steel and are superior in strength
and durability to modified stock or aluminum flywheels. The flywheels are compatible
with stock, TODA, or other aftermarket clutches. They come fully balanced and
ready to install. TODA Racing has been producing performance parts for the Miata
as well as complete Miata racing engines in Japan since 1992.
B6 Flywheel (shown) 3.5 kg
BP flywheel
4.5 kg
For more info: www.todaracing.com
(Added 4/1/01)
From
Good-Win Racing, the original home of the MonsterFlow intake for 99 and newer
Miatas, comes a new version of this popular intake kit in polished aluminum
for $210. This intake significantly brightens up the look of the under hood
area while adding horsepower and improving throttle response. As with the other
versions of this kit (which include either carbon fiber or plastic cross tubes),
this kit includes a patented MonsterFlow filter. The MonsterFlow filter features
unique turbulence correctly blades to smooth and direct air flow. The unique
two-piece foam filter comes apart for ease of cleaning. High quality silicon
hose connects the filter to the new polished aluminum cross tube. Comes complete
with installation instructions and all hardware.
For more information: www.good-win-racing.com
(Added 3/7/01)
For
the serious Miata racer looking to shed every unnecessary pound comes a 13.5
pound no liquid battery. Currently in use by several top autocrossers this battery
is an automotive dry cell battery. Shown here next to a standard large and heavy
vented factory battery from our 99 Miata this new battery comes with a one year
warranty. Built with extremely low internal resistance which leads to faster,
more consistent starting, this racing battery can withstand the rigors of high
performance and racing environments. It is built with corrosion resistant terminals
and is truly maintenance free. It has an excellent storage life and recharges
very quickly. Cost is $175 with free shipping, limited to quantity on hand.
Will ship it free to any continental U.S. location while supplies last.
For more information: www.good-win-racing.com
(Added 3/7/01)
Give
your Miata a classic European tail light look, with the Brain Storm Products
Vintage Dual Tail Light kit. These semi-flush fitting, round lenses in body-colored
tail light housings include the housing lenses screws, light sockets, bulbs
and instructions. Painting required.
For more info: Brain Storm Products
(Added 3/6/01)
The
“Roadster” logo, while not a Mazda USA official logo for the Miata here is very
popular among U.S. Miata owners. Now Team Miata introduces the Roadster logo
license plate frame. These come as either triple thick show chrome or 24k gold
finishes that are on to stay. Each is made from a solid brass core that won't
start to rust a few years down the line like some other frames on the market.
Frames are also available with the familiar “Miata” logo as well.
For more info: www.TeamMiata.com
(Added 3/1/01)
"Red
Ryder" is the first in a series of new Miata posters. Created by PJ Fagen,
the poster is a full size 24" x 34" full color offset print on top
quality #100 glossy paper. "Red Ryder" is also available signed and
numbered, and can include a personalized dedication from the artist. This is
a limited edition print, and is available only through vizzon.com.
For more information contact: www.vizzon.com
(Added 2/15/01)
Made
from the highest quality Japanese 304 stainless steel, beautifully polished
to a mirror finish, these are top quality license plate frames! Available in
stainless steel, and gold finish.
The gold finish is no ordinary electroplating. It's a Titanium Nitride coating, typically used to increase the life of metal cutting tools! It is harder than tool steel, and will NEVER tarnish, you will NEVER wear through this stuff! Guaranteed!
For more information contact: www.auto-expressions.com
(Added 2/11/01)
Replacing
your shocks with an aftermarket upgrade? Then why not replace those worn out
factory dust boots with this shock boot kit from Powerflex. Made from quality
grade material and designed to fit all brand shocks. A superior feature is the
polyurethane bump stops that prevent the shocks from bottoming-out. Complete
kit includes boots, bump stops and nylon ties for a long lasting fit and finish.
Powerflex kits are recommended by most major shock producers in Japan. The last
set of boot covers you'll buy. Sold in sets of 4.
For more information contact www.metromotorsports.com
(Added 2/11/01)
Think
your brake rotors are getting hot. Or perhaps your catalytic converter isn't
hot enough. What about your tires, headers or head temperature? Well stop guessing.
Team Miata introduces quickTEMP, an affordable hand-held, non-contact thermometer
sensor that safely and accurately measures temperature using infrared technologies.
Using a laser pointer, simply point at the desired target, press and hold the
button for the temperature to display - no contact is ever needed. The unit
has an initial temperature response time of 1 second and a continuous reading
to be used for thermal profiling. Great for that aggressive drive through the
hills and a must for the track and garage.
For more info: www.TeamMiata.com
(Added 1/23/01)
1999+
model year Miatas draw warm intake air from the underhood area The
solution: Cowl induction. A familiar concept to racers: it was born on
the NASCAR circuit in the early 1960's. With the release of the Randall Y2K
carbon/epoxy cowl induction unit, owners of newer Miatas can now benefit from
the increase in power provided by this cold air induction method.
For more info: www.ramairmakes.itgo.com
Available from Dealer Alternative - http://www.flyinmiata.com
(Added 1/23/01)
[Home] - [FAQ] - [Search] - [Sponsors] - [Forums] |
[Garage] - [Clubs] - [Contact Us] - [Disclosures] - [More...] |
Copyright
©1994-2024, Eunos Communications LLC
|