Corksport

Corksport Drift exhaust

[5/20/2008] Reviewed by: Evan - mxrider16@sbcglobal.net

Applicable to: '90 - '97 1.6 liter

Drift exhaust by Cork sport. Very nice construction. good looking welds. One problem was when installed was hitting half shaft. Heated up the tube and bend it a little works perfect. Great looking verrrry deep sound. Very loud but sounds good. Would be perfect for a turbo exhaust.

Like it very much good quality great customer service.

Happy with product cant wait to hear it with a turbo.

Under 30 minutes to remove completely

Cork Sport dual exhaust

[1/3/2005] Reviewed by: Bernard J Baca PHD - bbacaphd@indiana-imago.com

Applicable to: '99 + 1.8 liter

Cork sport exhaust system dual glass pack mufflers

Installed it last weekend. Easy installation. Two bolts on exhaust flange and two bolts on underside pan.

Easy install. Very booming exhaust note. I have supercharger installed and it is quite loud and booming expecially between 4500 and 7000 redline. the left muffler gets more exhaust than the right simply because it is more direct from the cat back to the cork sport mufflers. I may reinstall my racing beat dual exhaust simply to cut down the booming noise.

Not an installed item

Cork Sport "Power Series" - Dual Muffler

[3/16/2004] Reviewed by: Joe Bourg (MiataJoe)

Applicable to: '99 + 1.8 liter

Cork Sport 'Power Series' Exhaust system - Dual Muffler; Item # 99m-6-050

Limited installation instructions; template for cutting the bumper poor quality. As in other product review, the driver's side muffler does not extend out as much as the passenger side muffler; had to cut part of the tie down bracket (tow hook?) to stop the muffler on the passenger side from hitting the bracket in sharp turns.

Appears to be good quality stainless. Ad for product says that silencers are available, but none were - the muffler is louder than stock, though not at an idle. Check vendor for an improved version.

Over 30 minutes to remove completely

Cork Sport Dual Muffler Exhaust

[7/24/2003] Reviewed by: Bret Bailey - bret.bailey@comcast.net

Applicable to: '99 + 1.8 liter

This is a true dual muffler exhaust system. Of course, we can not put true dual exhaust on our Miatas but this is an interesting concept.

The install is easy. You do have to cut a slot in your bumper for the drivers side exhausy tip but all Miata duals require this type of cut. The instructions could have been better. The exhaust it self is very good, all polished stainless and the fit is good. The drivers side tip does not stick out as far as the passenger side, I hope to get this fixed with a little effort and a pipe bender.

The sound is louder than stock but not obnoxious. However, my wife states that she can hear the car when I pull into the driveway now. I am very pleased with the look and sound.

Under 30 minutes to remove completely