Finding
clean, classic gauge faces for our cars is a difficult task. The RS Products
Gauge Faces Type-MG will bring a classic roadster look to your interior with
neat and easy to read dials. The gauge faces are first class quality parts imported
directly from Japan and made especially for USA Miatas (MPH).
*Optional lighting color can be available to match GPS or aftermarket stereo.
These products are made by RS Products and only available from REV9 Autosport.
For more information: Rev9Autosport.com
(Added 12/30/07)
This
new cover from I.L.Motorsport should have been part of the original design.
The cover sits like a second skin over your seatbelt cover. Simple 10 minute
installation.
Only for soft top MX-5s.
For more information: I.L Motorsport
(Added 12/29/07)
Finish
off the underside of your Mazda Miata trunk with this logo'd trunk lid liner
carpet. It's made from a black automotive grade carpet which also helps eliminate
road noise.
Available in black with or without logo.
For more information: www.miatamania.com
(Added 12/3/07)
Keep
the wind out of your face and hair with a stylish windblocker. Offering a flush,
smooth fit, as well as a low profiile design, you can drive in top-down comfort
without detracting from the sporty look of your Miata.
For more information: www.miatamania.com
(Added 12/3/07)
Don't
waste your time looking at your spark plugs to figure out if your car is running
lean or rich, or trusting the stock O2 sensor. Innovate's wideband O2 sensor
and controller take the guess work out of analyzing your air/fuel ratio.
Wide Band O2 Sensor Controller - The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It includes digital input, output, and 2 user programmable analog outputs. The LC-1 is more accurate than a stock O2 sensor which is only calibrated to accurately analyze an air/fuel between 14:1 & 15:1. The LC-1 wideband O2 sensor and controller can read and accurately interpret air/fuel ratios from 9:1 to 17:1. With the included digital gauge this information is relayed to you instantly. The LC-1 has many benefits over conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 also works for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware.
For more information: www.miatamania.com
(Added 11/18/07)
Timing
Controller by PowerCard now in all Moss Motors M62 Superchargers
PowerCard's Timing Controller represents the latest in engine timing technology. As the OEMs upgrade and improve their engine management systems to comply with higher emissions standards, the timing control method for forced induction systems must improve for safe and powerful results. Timing Controller’s RPM based methodology is the answer.
For more information: www.miatamania.com
(Added 11/18/07)
The
Mazda Genuine Accessories Garmin nüvi® features turn-by-turn directions
to over 6 million points of interest including addresses, restaurants, hotels,
and much more. The 4.3-inch color touch screen features a simple-to-use menu
to get you where you want to go. With 3D map views showing the road ahead you
will receive voice directions announcing street names and automatic reroute
capabilities. Includes handy locator of every Mazda Dealer in the country! Beyond
navigation the nüvi features a Bluetooth hands free kit, MP3 and Audible
player, picture viewer, and world clock for all your travel needs.
Unique Mazda 760 features include:
For more information: Finishline Performance
(Added 11/9/07)
Rosenthal
Mazda & Finish Line are pleased to announce the following Mazdaspeed Performance
Accessory is in stock and ready for ordering:
MX-5 Front Big Brake Kit
*High Performance Brake Pads exhibit more noise than OEM brake pads
For more information: Finishline Performance
(Added 11/3/07)
Manufactured
exclusively for I.L.Motorsport by Eibach, this new lowering spring set drops
your car by approximately 45mm. Ground clearance is still no problem and driver
/ passenger comfort is not compromised (and the car looks 1000x better!). Combine
these with a Chassis Brace Set and Sway Bar Set from I.L. Motorsport for the
ultimate in road handling.
For more information: I.L Motorsport
(Added 11/3/07)
Give
your interior a classic 60’s look with these nice and clean pop-up lights
and hazard switches. The RS Products Classic Switches are first class quality
parts imported directly from Japan in limited quantities. Available in black,
silver or brushed aluminum (with or without indications).
These products are made by RS Products and only available from REV9 Autosport.
For more information: Rev9Autosport.com
(Added 10/21/07)
This
new tail light assembly was designed and manufactured by I.L.Motorsport for
your first generation MX-5 (NA). For the European market, it includes a rear
fog light so you can remove the original bumper mounted fog light. (Fog light
not included with US and Japanese versions.)
The tail light assembly is TÜV certified for European installations. Kit includes all required gaskets and wiring for a plug-and-play installation.
For more information: I.L Motorsport
(Added 9/15/07)
Made
for the race cars in Germany, this new exhaust from I.L. Motorsport is now TÜV
certified and legal in Europe. This Exhaust was specially developed for racing
applications by Realizer Racing on behalf of I.L.Motorsport They never thought
about putting this one on the street, but managed to get TÜV certification.
Now I.L. Motorsport can offer you a true racing exhaust from the racetrack.
Fabricated in 100% stainless steel with a 5 Year Warranty.
For more information: I.L Motorsport
(Added 8/22/07)
Made
of Polished Stainless Steel, the DDMWorks Spark Plug Wire Cover not only hides
the unsightly jumble of wires but adds personality and style! Available in Dragon
Tail, Blank or Flames Design.
For more information:www.DDMWorks.com
(Added 8/22/07)
It's
finally here and it doesn’t get any better than this! The DDMWorks Stage
2 is a fully enclosed Cold Air intake for the naturally aspirated 1999-2005
Miata. The DDMWorks Stage 2 intake replaces your stock restrictive air box and
crossover tube with a beautiful Stainless Steel fully enclosed intake, 304 Stainless
Steel crossover tube and K&N filter as well as all the hardware you will
need for your install. The Stage 2 is an easy install with a BIG reward! You
can feel the power right away and its’ growl will make you PURRR!
For more information:www.DDMWorks.com
(Added 8/11/07)
Now
available for all Mazda MX-5 with left hand drive, brand new and available at
I.L.Motorsport / Germany are the
new black tail lights for LHD Cars. The design of the lights has been revised,
and the large chrome area around the outside of the lights has been replaced
by black. This is much more tasteful, and means the lights now suit all colors.
For more information: I.L Motorsport
(Added 8/5/07)
Incredibly
strong & extremely heat resistant! Tough enough to take the worst pummeling
your engine can dish out. No other belts help protect your engine and deliver
high performance like Gates Racing Performance Belts. Yes, the color gives you
a hot custom look. But look deeper. Constructed of HNBR elastomeric composites,
Gates Racing Performance Belts are 300% stronger than stock belts and deliver
up to three times the heat resistance. You can count on them to hold up to the
rigors of high horsepower, even with interference engines.
For more information: www.miatamania.com
(Added 8/5/07)
DIYAutoTune's
new MegaSquirt PNP for the 1994-1995 Miata is a full-featured programmable ECU
(not a piggyback "Band-Aid") that plugs into your stock wiring harness
in place of the stock ECU behind the passenger seat. The only work required
under the hood is to confirm your baseline timing and route a single vacuum
line (included) from the engine bay to the ECU.
Then load the free MegaTune software onto your Windows laptop computer, connect the laptop to the ECU (a serial cable is included and an optional USB adapter is available), and you're all set to tune your engine's key operating parameters including fuel injection, ignition timing, temperatures, air/fuel ratio, rev limit, fan operation, turbo boost, and wastegate. If you have a turbo, there'll no longer be any need for a standalone manual or electronic boost controller.
A noteworthy upgrade to this new 1994-1995 edition of the MSPNP is the inclusion of an onboard 4 BAR MAP sensor providing automatic barometric pressure (i.e. altitude) correction and enabling electronic boost control of up to 44 PSI boost. Available options include an inexpensive kit to delete the restrictive hot-wire Mass Air Flow (MAF) sensor from the intake tract. DIYAutoTune is currently developing similar kits for 1996+ Miatas, so "Stay Tuned!"
For more information: MiataRoadster
(Added 8/5/07)
Another
name for the door armrests on the MX-5 could be plastic torture devices. They
are uncomfortable on a good day, leaving your elbow red and sensitive. By ordering
a padded leather armrest pad from Moss, happy cruising will be in your future
again.
For more information: www.miatamania.com
(Added 8/5/07)
When
fitting a European style 1din radio into your MX5, you are left with a mighty
large hole! This cubby box is the perfect filler. It fits securely from behind
and is strong enough for a standard radio cage to be fixed to it. Supplied complete
with a quartz analogue clock with a black or chromed surround. The box measures
approx 180mm x 69mm. The clock is powered by the car battery and includes night
illumination. Supplied with fixing screws. Wiring not included (Requires three
connections - permanent live, switched live (lights circuit) and ground - all
available from the radio wiring harness).
Fits all NA MX-5's and Eunos Roadsters, 89-98.
For more information: I.L Motorsport
(Added 8/5/07)
Until
now, these side boot covers have only been available in Europe from Mazda Dealers.
Now Moss is offering this elegant solution! Made from the same material as the
convertible top, these pieces cover up those gaping holes when the soft top
on your NC is lowered.
Installation is straight forward and easy!
For more information: www.miatamania.com
(Added 8/5/07)
Boss
Frog's new Frog Arms™ chassis braces mount under the front fenders and
stiffen the unibody both vertically and laterally. Fits all 1990-2005 Miatas.
For more information: MiataRoadster
(Added 7/26/07)
Mazda
MX-5 Miata: Find it. Fix it. Trick it. by Keith Tanner shows readers how to
make the most of any Miata: what to look for in a used model and how to perform
common maintenance and repairs, as well as over 15 projects to improve performance
and appearance. Focusing on the engine, wheels and tires, suspension, body kits,
interior, and more, the projects include full details on required parts, cost,
time, tools, and skill necessary for completion. With easy-to-follow directions
and clear illustrations, this handy guide is a virtual road map for taking the
Miata the full distance.
For more information: Amazon.com
(Added 6/30/07)
Next
time your significant other gives you a gift for your Miata, send a thank you
note on a special edition note card. Available as a set of 16 cards for $12.95.
A portion of the proceeds will be donated to The Hunger Project.
For more information: Miata.net
(Added 6/29/07)
Pick
up a set of four special edition posters at the low price of only $12.95 for
all four!
A portion of the proceeds will be donated to The Hunger Project.
For more information: Miata.net
(Added 6/29/07)
For
you chrome seekers, the folks at I.L. Motorsport now have chrome for your NC
style bar - perfectly coordinated with their other NC chromed bits.
Supplied in a set of two, including everything required for a 5 minutes installation.
For more information: I.L Motorsport
(Added 6/17/07)
I.L.Motorsport
chromed needle caps have a perfect fit and finish. Within a few minutes, you
can change your interior to a brand new look. Caps fit perfectly over the existing
caps.
For more information: I.L Motorsport
(Added 5/29/07)
I.L.
Motorsport brings us the finest defroster cover you can find for your Mazda
MX-5 NC. This cover fits like a second skin on your existing black defroster
vent and changes it to a perfect chromed finish. Simple installation using 3M
double sided tape.
For more information: I.L Motorsport
(Added 5/29/07)
Our
extra wide armrest offer both driver and passenger comfort. No need to elbow
wrestle over the soft cushiony armrest, now there is room for two. The armrest
is fitted to the center console without the use of any screws. It can be fitted
in a forward position allowing the use of the front cup holder, or it can be
fitted in the rear position allowing use of both cup holders.
For more information: www.miatamania.com
(Added 5/18/07)
If
you have to run a front license plate then you need Cobalt’s license plate
mounting kit. By relocating the license plate you create a unique look and the
grille is no longer covered, allowing maximum air flow to the radiator. The
mounting kit has 3 height positions to choose from – low, medium and high.
For more information: www.miatamania.com
(Added 5/16/07)
Enhance
your safety by adding brake light pulsing to your third brake light. The brake
light pulser module connects to your center high mount brake light (third brake
light) and automatically pulses it when you apply your brakes. The light will
pulsate on and off for about a second, then stay on steady for as long as you
press the brake pedal. Incorporated in the pulser is the "Delay-Repeat"
circuit, which requires the brake lights to be off for at least 15 seconds before
the cycle can be restarted. So, if you are in bumper-to-bumper traffic, the
brake light isn't always pulsing.
For more information: www.miatamania.com
(Added 5/16/07)
New
chromed inner door cups from I.L. Motorsport come in a one piece version for
your Mazda NC from 2006 and later.
Very easy to install with a 3M double side tape on the back. Beautiful triple chromed finish.
For more information: I.L Motorsport
(Added 5/4/07)
Raven
Wing Performance is proud to introduce THE CALIFORNIA POP-TOP™ - cockpit
covers for the 1990 to 2005 Miata and 2006 & 2007 MX-5.
The California PopTop™ cleanly fits your Miata whether the top is up or
down. Its patented fastening design, with mirror pockets, firmly attaches the
PopTop to your Miata without using a series of straps and hooks - and stays
put even in the wind!
Made of DuPont™ Tyvek®, the PopTop resists water penetration yet is
breathable, has a built-in anti-theft feature, an extremely small storage package,
and is ergonomically designed so it can be installed or removed in less than
a minute.
PopTop provides full window coverage, and blocks 99.8% of the sun's damaging
UV rays; virtually eliminating solar heat build-up within your Miata's interior.
It also provides winter-time protection from rain, dew, frost, and even snow!
Pop-Top comes complete with instructions and is backed by a 3-year warranty.
For more information: Raven Wing Performance
(Added 5/3/07)
Robbins' Streamline Economy Zipperless Tops for 90-05 Miatas are made to the
exact pattern of the New 2006 MX-5. This design eliminates the deck seams (front
to back seams above the doors) and the rear window panel standard on 90-05 Miatas.
This makes for an outstanding looking top that is sleek and smooth. Manufacturing
this top is easier, so it is a great value. Tops feature a zipperless design
so putting your top up and down is simplified. Glass window tops incorporate
a Heater/Defroster glass window. 90-97 owners with a hardtop can now enjoy a
defroster rear window in their soft top. Plastic window tops feature heat sealed
seams, not sewn, for strength and longevity.
Manufactured to Robbins' industry leading standards for quality. Superior fit, quality and value including a 3-year warranty.
For more information: www.miatamania.com
(Added 4/28/07)
Miata
power fanatics can rejoice, “IT” has arrived. Moss Motors' MP62 based
supercharger system was designed for the Miata enthusiast that wants to make
serious horsepower and torque with plenty of room available for significant
upgrades in power.
The entire system is designed around the Eaton MP62 Supercharger. The MP62 is a roots-type positive displacement blower that delivers instant boost at any RPM. Integrated into the MP62 supercharger is a boost bypass valve. When cruising, the bypass valve opens and re-circulates the air. This allows for fuel economy similar to stock. Put the hammer down and the bypass valve shuts immediately delivering instant boost to your Miata's engine. Every part in this system, including the Eaton supercharger, is warranted by Moss Motors for two years from the date of purchase.
Fuel enrichment under boost is provided by the PowerCard Pro. Moss Motors and Dobeck Performance have spent the last several years working together to create the most compact and very powerful - PowerCard Pro. The philosophy is simple, work in harmony with the factory ECU and simply add fuel where necessary only under boost. This philosophy will quickly become apparent the first time you drive your newly MP62 supercharged Miata. Instant boost, seamless power and no driveability quirks. A steady idle and nothing but a smooth delivery of boosted power that only the PC Pro can deliver. Another great PC Pro feature is real time fuel curve manipulation. Vast adjustment is available by simply targeting the appropriate zone and making a few clicks on the easy to use push button interface.
For more information: www.miatamania.com
(Added 4/28/07)
I.L.
Motorsport was looking to create a front bumper with a look similar to the MPS
version from Mazda. Designed for cars with or without Xenon lighting, the washer
nozzles and plate holes are marked in the bumper and can be easily cut out.
The bumpers are ready to paint and do not need addtional modifications.
The grill is not
additional and can be ordered in silver or black. (Close-up
animation)
For more information: I.L Motorsport
(Added 4/28/07)
The
new Satin Stretch car cover from Moss Motors is like a silky, sexy, black dress
for your Miata - it shows every curve. Satin Stretch custom car covers are made
for Miatas parked indoors, and for owners who want nothing but the best for
their vehicle. The material has Lycra fibers that stretch in every direction,
mirroring every perfect contour of your Miata. The inner liner is the softest
fleece available - specially designed not to rub off on convertible tops. 90-05
models are grey, 06-07 are black.
For more information: www.miatamania.com
(Added 4/25/07)
Do
you find yourself hot and uncomfortable even though the top is down? Are you
constantly trying to scoop in air you’re your hand from above the windshield
or through the window? With the Cool Breeze Scoop™ you will have fresh
outside air being forced in over the console and into the foot wells and cooling
you below the waist. The Cool Breeze Scoop™ is an easy-on/easy-off accessory
that take less then 10 seconds to install and fits easily in your glove box
when not in use. The Cool Breeze Scoop™ is molded from an automotive ABS/Polycarbonate
composite plastic. It is non-reflective black with a textured finish. It can
be primed and painted in a color of your choice with flexible bumper paint,
but looks great the way it is delivered.
For more information: www.miatamania.com
(Added 2/25/07)
You'll
want to drive barefoot, all the time, upon installing a pair of our plush floor
mats. Mats are constructed from thick, dense pile carpet with a heavy rubber
ribbed backing to keep them securely in place. Vinyl bound edges look great
in the contrasting logo color or choose black for a subtle look.
For more information: www.miatamania.com
(Added 2/24/07)
Birds
Eye mirrors fit over the factory glass. Aspherically bent, this mirror expands
your field of vision up to three times from 16 degrees to a full 40 degrees
making everything from lane changing to parking much safer. Made with an anti-glare
glass (reduces night glare by 55%), its breakthrough technology provides stepless
vision without double image distortion. No tools, no hassles, just peel off
the backing and apply. The strong adhesive strip provides a solid hold.
For more information: www.miatamania.com
(Added 2/24/07)
Jackson
Racing has developed a new style tensioner for M45 supercharged Miatas and is
now standard in all systems. This new tensenior assembly eliminates belt slipping
issues by allowing for more adjustment, especially useful on higher boost systems.
Belt now runs in the center of the idler pulleys and not to one edge or the
other. Belt changes are simpler and less time consuming. Includes 2 new idler
pulley as well. Power Steering is required for new belt tensioner. Belt sold
separately.
For more information: www.miatamania.com
(Added 2/24/07)
I.L.Motorsport
produced this aluminum sway bar kit for all Mazda MX-5 NC from 2006 and later.
The kit is made in AL7050, includes new bushings and brackets, and will be TÜV
certified for the European market.
The image at the left was taken during the TÜV testing for product stability. After 1,000,000 cycles on the testing machine, bar stiffness suffered no loss. This is a 35% stiffer and 45% lighter sway bar set, and with TÜV testing and certification, it is legal for Europe.
For more information: I.L
Motorsport
(Added 2/16/07)
| [Home] - [FAQ] - [Search] - [Sponsors] - [Forums] |
| [Garage] - [Clubs] - [Contact Us] - [Disclosures] - [More...] |
Copyright
©1994-2024, Eunos Communications LLC
|